Hi,I've tried the recent stable version build and it looks better than before. The only issue I have is with launching desktop under memory protection (I was brave enough to do it ;) ). No matter which AV SERVER is set (Jinnee, Thing(1.26), recent Teradesk) it always crashes during boot up, desktop shows up for a second and is killed. Launching Teradesk manually works (from Xaaes launch desk), Thing and Jinnee are killed right away no matter what. I've attached logs.
It's pretty annoying.Without memory protection everything works fine.Second thing, I 've got few AES errors during boot up (see AESerrors.jpg attached). It displays with/without memory protection.I've reported them some time ago.
Third thing system moans about normal TOS partitions that filesystem should be checked. Is any way to disable it or run automated tests like with ext2? I've got also ocassional hangups during shutdown(sometimes whole process works, sometimes not). See reboot.jpg (it was with memory protection). I've typed in reboot in console to reboot machine.
My hardware: falcon ct60/ctpci and recent stable TOS and Radeon drivers, kernel is 060 and xaaes km is 060 version too. XA_BOOT is quite long, but you should find the proper logs by seeking paths: C:\utils\teradesk(teradesk), c:\jinne(jinnee), c:\thing126\thing (thing 1.26, I haven't got recent version). I'm talking here about desktop kills.
I've also attached my configuration files(XAAES/MINT). Regards, Pawel W dniu 2011-01-06 12:57, Alan Hourihane pisze:
Ignore "take a look at section 3.3" it refers to 1.16.0 documentation. I'll remove that bit of text. If you have an existing installation, just use your existing mint.cnf and copy it into the 1-17-0 folder. Alan. On Thu, 2011-01-06 at 12:44 +0100, jury wrote:Hi Thanks very much to all for this release, but I have some struggle. Today I tried to upgrade to 1.17.0 using information on page: http://www.atariforge.net/sparemint/download.html The problem is, where is this section 3.3 from step 3: Step 3: - Edit C:\MINT\1-17-0\MINT.CNF; take a look at section 3.3. I cant find it anywhere, where could I look for it? As mint 1.17.0 doesnt go too far on the default mint.cnf. jury "how far can they control my mind" Dnia 30 grudnia 2010 1:26 Alan Hourihane<alanh@fairlite.co.uk> napisał(a):Hello all, I have great pleasure in announcing that FreeMiNT 1.17.0 has been released. The CVS has been tagged with "freemint-1_17_0" in which binaries will be available later. This is a huge milestone for everyone involved after so many years without a stable release. It is my hope that we'll all continue to strive to make 1.18 even better, but if the need arises we will release a 1.17.1 (or .2 and so one) if bugs are discovered in the 1.17 release. Many thanks to all, and a special thanks to Frank Naumann ! Let me know of any problems in the tarballs tomorrow and I can update as quickly as possible. The binaries should also be uploaded to the SpareMiNT site as soon as possible too. Thanks, and a happy new year to everyone ! Alan.
Attachment:
AESerrors.jpg
Description: JPEG image
bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:45705AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4564454, 0x4564354, moose.adi) load_adi: return 0 load_adi: enter (0x4522314, 0x4522214, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 453E004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4568FE8) 'u:\c\mint\bubble\bubble.app' args[2]: =(4569018) '' autorun[1]: cmd=(4568F88) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4568FB8) '-l' autorun[0]: cmd=(4568F28) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4568F58) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:89.9MHz BogoMIPS:179.81 Calibration:89907200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 12:34:06: pid 104 (jinnee): Could not open shared library `EDITOBJC.SLB' XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) **** Leave kernel for shutdown AESSYS kthread exited - C.shutdown = 8007013F init:return 0 12:34:06: PROCESS "jinnee" KILLED: MEMORY VIOLATION. (PID 107) Type: private PC: 04DB5292 Addr: 00084506 BP: 01666000 OS: 0374F192 Cleaning up ready to exit.... wait for AES help thread to terminate.... 12:34:06: PROCESS "jinnee" KILLED: MEMORY VIOLATION. (PID 109) Type: private PC: 04DB5292 Addr: 00084506 BP: 01666000 OS: 0374F192 'XaSYS': fatal error: 10 Cleaning up ready to exit.... wait for AES help thread to terminate.... bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:45A85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x459C454, 0x459C354, moose.adi) load_adi: return 0 load_adi: enter (0x455A314, 0x455A214, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1103 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4576004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(45A0F88) 'u:\c\mint\bubble\bubble.app' args[2]: =(45A0FB8) '' autorun[1]: cmd=(45A0F28) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(45A0F58) '-l' autorun[0]: cmd=(45A0EC8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(45A0EF8) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:90.1MHz BogoMIPS:180.22 Calibration:90112000 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 12:38:20: pid 104 (jinnee): Could not open shared library `EDITOBJC.SLB' bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49A5344, 0x49A5244, moose.adi) load_adi: return 0 load_adi: enter (0x49A4494, 0x49A4394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4980004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49A63B8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49A63E8) '' autorun[1]: cmd=(49A6358) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(49A6388) '-l' autorun[0]: cmd=(49A62F8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(49A6328) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:89.9MHz BogoMIPS:179.81 Calibration:89907200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 12:09:09: pid 104 (jinnee): Could not open shared library `EDITOBJC.SLB' 12:09:16: pid 104 (jinnee): FATFS (R): bio_data_read: out of range (170298343 (230372) 1362390360 (3632)), aborted 12:09:28: pid 104 (jinnee): FATFS (R): FAT corrupted, illegal successor 99589439 for cluster 128! XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49A5344, 0x49A5244, moose.adi) load_adi: return 0 load_adi: enter (0x49A4494, 0x49A4394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49A5344, 0x49A5244, moose.adi) load_adi: return 0 load_adi: enter (0x49A4494, 0x49A4394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49A5344, 0x49A5244, moose.adi) load_adi: return 0 load_adi: enter (0x49A4494, 0x49A4394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4980004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49A63B8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49A63E8) '' autorun[1]: cmd=(49A6358) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(49A6388) '-l' autorun[0]: cmd=(49A62F8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(49A6328) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:89.9MHz BogoMIPS:179.81 Calibration:89907200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 12:48:29: pid 104 (jinnee): Could not open shared library `EDITOBJC.SLB' 12:54:03: pid 104 (jinnee): FATFS (R): FAT corrupted, illegal successor 87688704 for cluster 2! 12:54:03: pid 104 (jinnee): FATFS (R): FAT corrupted, illegal successor 87688704 for cluster 2! XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49AA3E4, 0x49AA2E4, moose.adi) load_adi: return 0 load_adi: enter (0x49A9344, 0x49A9244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 497C004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4990598) 'u:\c\mint\bubble\bubble.app' args[2]: =(49905C8) '' autorun[1]: cmd=(4990538) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4990568) '-l' autorun[0]: cmd=(49904D8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4990508) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49B85AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x49AA5A4, 0x49AA4A4, moose.adi) load_adi: return 0 load_adi: enter (0x49A9344, 0x49A9244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11D0000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=0/1168 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 48DA004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49A45C8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49A45F8) '' autorun[1]: cmd=(49A4568) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(49A4598) '-l' autorun[0]: cmd=(49A4508) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(49A4538) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:89.9MHz BogoMIPS:179.81 Calibration:89907200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 13:19:22: pid 104 (jinnee): Could not open shared library `EDITOBJC.SLB' XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x496A5A4, 0x496A4A4, moose.adi) load_adi: return 0 load_adi: enter (0x4969344, 0x4969244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4964598) 'u:\c\mint\bubble\bubble.app' args[2]: =(49645C8) '' autorun[1]: cmd=(4964538) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4964568) '-l' autorun[0]: cmd=(49644D8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4964508) '' Launch shell 'c:\jinnee\jinnee.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:89.9MHz BogoMIPS:179.81 Calibration:89907200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 08:44:06: pid 101 (jinnee): Could not open shared library `EDITOBJC.SLB' 08:44:06: PROCESS "jinnee" KILLED: MEMORY VIOLATION. (PID 101) Type: free PC: 02371A08 Addr: 013EE04E BP: 02366000 OS: 0000B908 XaSYS(93:AES:91): sigterm received (ignored) AESSYS(91:AES:91): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x496A4C4, 0x496A3C4, moose.adi) load_adi: return 0 load_adi: enter (0x4969344, 0x4969244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4964568) 'u:\c\mint\bubble\bubble.app' args[2]: =(4964598) '' autorun[1]: cmd=(4964508) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4964538) '-l' autorun[0]: cmd=(49644A8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(49644D8) '' Launch shell 'c:\utils\teradesk\desktop.prg' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 09:08:28: PROCESS "desktop" KILLED: MEMORY VIOLATION. (PID 101) Type: private PC: 0238529E Addr: 01F61ED2 BP: 02366000 OS: 0001F19E XaSYS(93:AES:91): sigterm received (ignored) AESSYS(91:AES:91): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4967344, 0x4967244, moose.adi) load_adi: return 0 load_adi: enter (0x4965344, 0x4965244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x492C314, 0x492C214, moose.adi) load_adi: return 0 load_adi: enter (0x4965344, 0x4965244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(496E6E8) 'u:\c\mint\bubble\bubble.app' args[2]: =(496E718) '' autorun[1]: cmd=(496E688) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(496E6B8) '-l' autorun[0]: cmd=(496E628) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(496E658) '' Launch shell 'c:\utils\teradesk\desktop.prg' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 11:16:23: PROCESS "desktop" KILLED: MEMORY VIOLATION. (PID 104) Type: private PC: 0238529E Addr: 01F61ED2 BP: 02366000 OS: 0001F19E XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4967344, 0x4967244, moose.adi) load_adi: return 0 load_adi: enter (0x4965344, 0x4965244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49686B8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49686E8) '' autorun[1]: cmd=(4968658) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4968688) '-l' autorun[0]: cmd=(49685F8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4968628) '' Launch shell 'c:\utils\teradesk\desktop.prg' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 16:08:20: PROCESS "desktop" KILLED: MEMORY VIOLATION. (PID 104) Type: private PC: 0238529E Addr: 01F61ED2 BP: 02366000 OS: 0001F19E XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4967344, 0x4967244, moose.adi) load_adi: return 0 load_adi: enter (0x4969344, 0x4969244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 493C004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49505F8) 'u:\c\mint\bubble\bubble.app' args[2]: =(4950628) '' autorun[1]: cmd=(4950598) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(49505C8) '-l' autorun[0]: cmd=(4950538) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4950568) '' Launch shell 'c:\thing126\thing\thing.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 16:12:19: PROCESS "thing" KILLED: MEMORY VIOLATION. (PID 104) Type: private PC: 023AFC3A Addr: 01F61ED2 BP: 02366000 OS: 00049B3A XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4967344, 0x4967244, moose.adi) load_adi: return 0 load_adi: enter (0x4965344, 0x4965244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49686B8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49686E8) '' autorun[1]: cmd=(4968658) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4968688) '-l' autorun[0]: cmd=(49685F8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4968628) '' Launch shell 'c:\thing126\thing\thing.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.1MHz BogoMIPS:132.30 Calibration:66150400 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 07:52:28: PROCESS "thing" KILLED: MEMORY VIOLATION. (PID 104) Type: private PC: 023AFC3A Addr: 01F61ED2 BP: 02366000 OS: 00049B3A 08:00:04: PROCESS "thing" KILLED: MEMORY VIOLATION. (PID 115) Type: hardware PC: 029CF030 Addr: FFF80100 BP: 01F66000 OS: 00A68F30 08:00:14: pid 120 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=1F66000, text=1F66100, data=1FB1448, bss=1FB80B2) 08:00:22: pid 122 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=1F66000, text=1F66100, data=1FB1448, bss=1FB80B2) 08:01:10: pid 124 (JINNEE): Could not open shared library `EDITOBJC.SLB' XaSYS(96:AES:94): sigterm received (ignored) AESSYS(94:AES:94): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4969344, 0x4969244, moose.adi) load_adi: return 0 load_adi: enter (0x4968494, 0x4968394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4964598) 'u:\c\mint\bubble\bubble.app' args[2]: =(49645C8) '' autorun[1]: cmd=(4964538) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4964568) '-l' autorun[0]: cmd=(49644D8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4964508) '' Launch shell 'c:\thing126\thing\thing.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 15:27:11: pid 101 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=2366000, text=2366100, data=23B1448, bss=23B80B2) XaSYS(93:AES:91): sigterm received (ignored) AESSYS(91:AES:91): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4969344, 0x4969244, moose.adi) load_adi: return 0 load_adi: enter (0x4968494, 0x4968394, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(4964568) 'u:\c\mint\bubble\bubble.app' args[2]: =(4964598) '' autorun[1]: cmd=(4964508) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4964538) '-l' autorun[0]: cmd=(49644A8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(49644D8) '' Launch shell 'c:\thing126\thing\thing.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 15:30:11: pid 101 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=2366000, text=2366100, data=23B1448, bss=23B80B2) XaSYS(93:AES:91): sigterm received (ignored) AESSYS(91:AES:91): sigterm received (ignored) bootlog 'u:\c\MINT\1-17-0\XAAES\xa_boot.log' ~~~~~~~~~~~~ XaAES start up!! ~~~~~~~~~~~~~~~~ stack is long-aligned:49785AC sysfile_exits: 'u:/c/mint/1-17-0/moose.xdd' sysfile_exits: 'u:/c/mint/1-17-0/moose_w.adi' sysfile_exits: 'u:/c/mint/1-17-0/moose.adi' home_path: '\c\MINT\1-17-0\XAAES\' sysfile_exits: 'u:\c\MINT\1-17-0\XAAES\moose_w.adi' XaAES v0.999 Release MultiTasking AES for MiNT Part of freemint (http://sparemint.org). Supports mouse wheels Compile time switches enabled: - CTRL+ALT key-combo's - Client vector validation - Realtime (live) window scrolling, moving and sizing nkc_init ok! Loading config \c\MINT\1-17-0\XAAES\xaaes.cnf load adi modules Loading AES Device Drivers: load_adi: enter (0x4967344, 0x4967244, moose.adi) load_adi: return 0 load_adi: enter (0x4965344, 0x4965244, moose_w.adi) load_adi: return 0 adi_load: done Creating XaAES kernel thread Installed 'nAES' cookie in readable memory at 11E8000 k_init: videomode=16869 nvdi version = 500 could not determine fvdi version 1st v_opnvwk ->0, wh=279/16662 0 colors invalid values, trying physical workstation k_init:vdo=30000 vm=41E5 video=16869 Falcon video: mode 16869(41E5) Screenmode is: 5 k_init: v_opnwk() mode=5 k_init: v_opnwk() handle=2 Physical work station opened: 2 Virtual work station opened: 3 lookup-support:0, planes:32 detect_pixel: using vs_color 32 bit pixel FFFF00 is moto format Video info: width(1280/1024), planes :32, colours 256 pixel-format 0 palsz=1536 Display Device: Phys_handle=2, Virt_handle=3 size=[1280,1024], colours=256, bitplanes=32 Loading system resource file 'xaaes009.rsc' xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xaaes009.rsc' exists - return = 0 system resource = 4946004 (\c\MINT\1-17-0\XAAES\xaaes009.rsc) xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\xa_xtobj.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbox.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbox.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\popbkg.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\popbkg.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dbutton.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dbutton.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\dtext.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\dtext.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\widgets/ronb_wdg.rsc' exists - return = 0 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slider.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slider.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slider.img depacking...OK!, has palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slide.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\slide.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\slide.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslider.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslide.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideru.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\vslideu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\info.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\info.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\info.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:24 , tranform 24 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\infou.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\wtitle.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\wtitle.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\wtitleu.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\slwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\ulwtitle.img' exists - return = -33 xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' exists - return = 0 load_img: '\c\MINT\1-17-0\XAAES\img\hc\exterior.img' load_img: file \c\MINT\1-17-0\XAAES\img\hc\exterior.img depacking...OK!, no palette pixel format:screen:planes=32 pixel-format=0 src:8 , tranform 8 -> 32 bpp...OK! xaaes_sysfile: check if '\c\MINT\1-17-0\XAAES\img\hc\uxterior.img' exists - return = -33 alert:7, KBD:8 Wheel support present Using moose adi Loading AES modules... loading accs --------------------------- loading accessories from 'C:\' load_accs: launch (C:\mintsett.acc) load_accs: launch (C:\xcontrol.acc) load_accs: launch (C:\st-guide.acc) load_accs: launch (C:\ct60temp.acc) loading shell and autorun --------------- autorun[2]: cmd=(49686B8) 'u:\c\mint\bubble\bubble.app' args[2]: =(49686E8) '' autorun[1]: cmd=(4968658) 'u:\c\mint\toswin2\toswin2.app' args[1]: =(4968688) '-l' autorun[0]: cmd=(49685F8) 'u:\c\mint\strngsrv\strngsrv.prg' args[0]: =(4968628) '' Launch shell 'c:\thing126\thing\thing.app' with args 'No args' cpuinfo:CPU:68060 MMU:68060 FPU:68060 Clocking:66.3MHz BogoMIPS:132.71 Calibration:66355200 loops MEMPROT:ON, Stack: 444 version:FreeMiNT version 1.17 (alanh@server.(none)) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5)) #1 Thu Dec 30 01:19:09 GMT 2010 15:46:21: pid 104 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=2366000, text=2366100, data=23B1448, bss=23B80B2) 15:47:03: pid 115 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=1F66000, text=1F66100, data=1FB1448, bss=1FB80B2) 15:47:09: pid 117 (thing): ILLEGAL INSTRUCTION: User PC=250C10A (basepage=1F66000, text=1F66100, data=1FB1448, bss=1FB80B2) 15:48:00: pid 119 (JINNEE): Could not open shared library `EDITOBJC.SLB' 15:48:01: PROCESS "JINNEE" KILLED: MEMORY VIOLATION. (PID 119) Type: private PC: 011584D2 Addr: 00084512 BP: 01F66000 OS: FF1F23D2
# MINT.CNF # custom mint 1.17.0 # Environment setenv PCONVERT PATH,HOME,SHELL setenv UNIXMODE /brUs setenv PATH /sbin;/bin;/usr/sbin;/usr/bin;u:\bin;u:\usr\bin;u:\usr\sbin;u:\sbin;u:\boot\mint\bin; setenv HOSTNAME nokturnal setenv TMPDIR u:/tmp setenv SLBPATH c/mint/slb setenv ACCPATH C:/ setenv ACCEXT ACC,ACX setenv GEMEXT PRG,APP,GTP,OVL,SYS setenv TOSEXT TOS,TTP setenv TOSRUN c:/mint/toswin2/tw-call.app setenv GEMJINGPATH c:/mint/gemjing/gemjing.prg setenv OLGAMANAGER c:/mint/olga/olga.app setenv TZ 'Europe/Warsaw' # SDL stuff setenv SDL_VIDEODRIVER xbios setenv MINT_AUDIODRIVER mint_xbios #setenv SDL_NATIVE_MUSIC_EXT 1 setenv HOME u:\home setenv BROWSER c:\highwire\highwire.app setenv MOVIEPLAYER f:\aniplay.222\aniplay.prg setenv COLORSELECT c:\mint\colsel\colsel.prg setenv GEMSCRIPT c:\scripter\scripter.app KERN_SLICES=2 KERN_BIOSBUF=YES KERN_SECURITY_LEVEL=0 KERN_MPFLAGS=0 TPA_FASTLOAD=NO TPA_INITIALMEM=4096 #FS_NEWFATFS=A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,V,W,X,Y,Z FS_VFAT=D,E,F,G,H,I,J,K,L,M,N,O # FS_VFAT_LCASE=YES tells the kernel to return lowercase filenames # from VFAT directory searches. The default is NO. #FS_VFAT_LCASE=YES FS_WB_ENABLE=P,Q FS_CACHE_SIZE=4096 #FS_CACHE_PERCENTAGE=10 #FS_UPDATE=10 FDC_HIDE_B=YES # PROC_MAXMEM= gives the maximum amount of memory that any process # may use (in kilobytes). The default is to make this unlimited, but # if you have a lot of memory and/or programs that grab more memory # than they should, try setting this. # # E.g. to limit processes to 4096K of memory, remove the '#' at the # beginning of the next line. # # WARNING: the process will not be allowed to allocate memory beyond # the limit, and it won't "see" more memory as available from the # system. # Please understand that programs like "free" (or any other that # interrogates the system how much memory is available) is a process # as well, thus it will undergo this limit too! # # Decent shells (desktops) allow you to limit the maximum amount of # memory independently for each program. #PROC_MAXMEM=4096 GEMDOS_AUX=u:/c/mint/aux.out GEMDOS_CON=u:/c/mint/con.out GEMDOS_PRN=u:/c/mint/prn.out # # Links sln p:/bin u:/bin sln p:/boot u:/boot sln p:/etc u:/etc sln p:/home u:/home sln p:/lib u:/lib sln p:/lost+found u:/lost+found sln p:/mnt u:/mnt sln p:/opt u:/opt sln p:/root u:/root sln p:/sbin u:/sbin sln p:/tmp u:/tmp sln p:/usr u:/usr sln p:/var u:/var sln u:/pipe/pty.A u:/dev/pty.A sln u:/pipe/pty.B u:/dev/pty.B sln u:/pipe/pty.C u:/dev/pty.C sln u:/pipe/pty.D u:/dev/pty.D sln u:/pipe/pty.E u:/dev/pty.E sln u:/pipe/pty.F u:/dev/pty.F sln u:/pipe/pty.G u:/dev/pty.G sln u:/pipe/pty.H u:/dev/pty.H sln u:/pipe/pty.I u:/dev/pty.I sln u:/pipe/pty.J u:/dev/pty.J sln u:/pipe/pty.K u:/dev/pty.K echo # Filesystemcheck (mandatory) exec u:/c/mint/bin/sh u:/c/mint/bin/fscheck.sh echo # # Timezone (mandatory) exec u:/sbin/tzinit -l echo #echo Launching FVDI #exec u:/c/fvdi.prg cd u:\ INIT=u:/sbin/init echo Setup complete, now booting system... echo
#rgb overscan
#video= 0x016b
#vga normal
#video=0x003b
#vga centscreen mode
#video=0x403b
#video=1
#radeon
video=0x41E5
gradients = 0
naes_cookie = yes
usehome = yes
dc_time = 35
#mp_timegap = 5
#lrmb_swap = yes
#mouse wheel config
vertical_wheel_id = 0
vertical_wheel_amount = 3
horizontal_wheel_id = 1
horizontal_wheel_amount = 3
redraw_timeout = 500
#####################################################################
# menu = <string> (default is 'leave')
# <string> can be 'pull', 'push' or 'leave'
#menu = push
#####################################################################
# popscroll = <value> (default is 0)
# Set number of lines of a popup above which it will be made scrollable
#popscroll = 16
#####################################################################
# menupop_pids = <bool> (default = 'no')
#
# Setting menupop_pids = yes makes XaAES list its clients in the client-list-
# menupopup using the following format;
#
# " PPID(RPPID) -> PID Client nice name"
#
# where 'PPID' is the physical parent-pid of the Client (which is the AESSYS).
# 'RPPID' is the Process ID of the process that called shel_write() to start
# it, it is the "Real Parent PID". 'PID' is the Process ID of the client.
#
# If set to 'no' (the default), only the client's nice name (when available,
# else its 'proc_name') is listed.
#
#menupop_pids = yes
popup_timeout = 50
popout_timeout = 1000
#toppage = faint
#alert_windows = 0x0000
#####################################################################
# icnfy_orient = <value> (default is 3)
#
# This controls how XaAES arranges iconified windows. Currently the
# following orientations are available;
#
# 0 - Iconified windows are stacked top -> bottom starting at the
# top/left of the screen. When one column is full, the next
# column is being used.
# 1 - Iconified windows are stacked top -> bottom starting at the
# top/right of the screen. When a column is full, windows are
# stacked in the column to the left of the filled one.
# 2 - Iconified windows are placed in rows going left -> right starting
# at the top/left of the screen. When a row is full, the row below
# the current one is used.
# 3 - Iconified windows are placed in rows going left -> right starting
# at the bottom/left of the screen. When a row is full, the row above
# the current one is used.
#
# If you bit 8 in icnfy_orient value is set, then the starting position
# will be reversed. This means that for orientation 0, the windows will
# be stacked bottom -> top starting at the bottom-most position instead.
# Using a hexadecimal value is easy for better readability;
#
#icnfy_orient = 0x003 # Start at left/bottom of the screen and go towards
# the right/bottom.
icnfy_orient = 0x103 # Start at right/bottom corner and go towards
# windows towards the left/bottm corner.
#####################################################################
# icnfy_width = <value> (default is 72)
# icnfy_height = <value> (default is 72)
#
# These sets the width and height of iconified windows.
icnfy_width = 80
icnfy_height = 80
#####################################################################
# icnfy_left = <value> (default is 0)
# icnfy_right = <value> (default is 0)
# icnfy_top = <value> (default is 0)
# icnfy_bottom = <value> (default is 0)
#
# These variables dictates how far from left, right, top and bottom edges
# of the screen the iconfied windows should be placed. This means that
# if icnfy_left is set to 4, iconified windows are always placed minimum 4
# pixels off the left edge of the screen. If you want to protect the area
# of the taskbar, for example, you can use icnfy_bottom = 16, for example,
# as that makes sure iconified windows never get closer to the bottom of the
# screen than 16 pixels.
#
#icnfy_left = 0
#icnfy_right = 0
#icnfy_top = 0
#icnfy_bottom = 16
#####################################################################
# icnfy_reorder_to = <time in ms> (default is 0)
#
# Setting this to a nonzero value will make XaAES rearragne the currently
# iconified windows when an iconified window is uniconified or hidden.
# This will also, later on, reorder iconified windows when an application
# that quits had iconified windows.
#
#icnfy_reorder_to = 100
#####################################################################
# next_active = <string> (default is 'window')
#
# <string> can be 'client' or 'window'.
#
# Selects wether the previous active application or
# the owner of the previous topped (or only) window
# should be set active upon client termination.
#
#next_active = client
app_options = default, thinwork = false, winframe_size = 2
app_options = taskbar, inhibit_hide = yes, clwtna = yes
#simple
#app_options = default,xa_nomove = false
#real
app_options = default,thinwork = true, winframe_size = 2, xa_nomove = false, clwtna = 0, nolive = true
app_options = xasys, thinwork = true, winframe_size = 3, xa_nomove = false, clwtna = 1, nolive = false
app_options = aessys, thinwork = true, winframe_size = 3, xa_nomove = false, clwtna = 1, nolive = false
#
app_options = toswin2, nohide = true,noleft=true
app_options = pc_help, alt_shortcuts = 0
app_options = diskus, alt_shortcuts = 0
app_options = DESKTOP, alt_shortcuts = 1
app_options = jaygrpii, alt_shortcuts = 0
app_options = autos401,xa_nomove = true
app_options = ataricq,thinwork = true, winframe_size = 0
app_options = jinnee, naesff = true
app_options = nwatch, thinwork = true, winframe_size = 0
app_options = popwatch, thinwork = true, winframe_size = 0
app_options = taskbar, inhibit_hide = yes, clwtna = true
app_options = mymail, thinwork = true, winframe_size = 0
app_options = highwire, winframe_size = 0
#####################################################################
# ctlalta_survivors = <list of app-names>
#
# 'app-names' is the filename part of the program file, padded with
# spaces to fit 8 characters. This is NOT the 'nice' name. So, if your
# Toswin2 binary is named "tw2.app", you use "tw2 ". Each app-name
# is separated with comma.
#
# This will allow you to specify which applications XaAES does not
# attempt to terminate when user presses CTRL-ALT-A to quit all
# applications. Normally, this keycombo quits all running applications
# leaving only XaAES. However, most of the time, keeping certain
# applications running is preferred, such as the desktop, the taskbar,
# av-server application, etc, etc.
#
# One special name is '_aes_shell_', which will prevent XaAES from
# terminating the desktop loaded via "shell = " configuration variable.
# One can still use the name of the desktop program if it is konwn, but
# an easier way is to use '_aes_shell_', as that will work without
# further configuration modifications when one changes desktop from, say,
# Thing to Jinnee.
#
# If you want to bypass this setting, and quit ALL applications, leaving
# only XaAES, you can press ctrl-alt-shift-a.
#
# The following will keep the desktop, taskbar and toswin2 running after
# a ctrl-alt-a action;
#
cltalta_survivors = "_aes_shell_", "taskbar ", "toswin2 "
#
ctlalta_survivors = "toswin2 ", "strngsrv", "_aes_shell_", "taskbar "
#####################################################################
# kill_wo_question = <list of app-names>
#
# 'app-names' is the filename part of the program file, padded with
# spaces to fit 8 characters. This is NOT the 'nice' name. So, if your
# Toswin2 binary is named "tw2.app", you use "tw2 ". Each app-name
# is separated with comma.
#
# This will allow you to specify applications which should be killed without
# question during shutdown. It is necessary because many apps dont react to
# the AP_TERM message, leaving the AES waiting for a maximum amount of time
# each time the user wants to quit or change resolution. Very annoying for
# the user, to say the least! Applications found in this list will be
# brutally killed immediately, so make sure you dont add clean apps to this
# list!
# Application authors: Make sure your apps dont end up on this list! :)
kill_wo_question = "procalc", "mintsett"
kill_wo_question = "ST-Guide"
#####################################################################
# clipboard = <path> # path to clipboard
# accpath = <path> # path from which accs are loaded
# launchpath = <path> # initial path for launcher
#
clipboard = c:\clipbrd\
accpath = c:\
launchpath = u:\usr\gem
#####################################################################
# define external snapshot-program to be executed if xaaesnap is not loaded
#snapshot=u:/usr/local/bin/snapshot
#resource = xa_mono.rsc
widgets = widgets/ronb_wdg.rsc
#use_rsc_palette = yes
#remap_cicons = yes
#widget_auto_highlight = yes
helpserver = HYP,HYP_View,\hypview\hyp_view.app
helpserver = HTM,HighWire,c:\highwire\highwire.app
#####################################################################
# cancel = string,string
#
cancel = cancel,abbruch,annuler,avbryt,anuluj,afbryd,undo
#####################################################################
# filters = mask, mask, ...
#
filters = *.*, *.[atpg]*, *.[chs]*, *.l*, *.o*
#####################################################################
# font_id - Standard GDOS fontid for windows & stuff
# standard_point - Size of the 'standard' AES font (for window titles, etc)
# medium_point - The same, but for low resolution screens
# small_point - Size of the 'small' AES font
#
# defaults:
#
#font_id=1
#standard_point=10
#medium_point=9
#small_point=8
#####################################################################
# start any other programs with run
#
#run u:\c\mint\ztask\ztask.app
#run u:\c\mint\stic\stic.app
#taskbar
#run u:\c\mint\mltstrp\mltistrp.app
#run u:\c\mint\taskbar\taskbar.prg
run u:\c\mint\strngsrv\strngsrv.prg
run u:\c\mint\toswin2\toswin2.app -l
run u:\c\mint\bubble\bubble.app
#run u:\c\mint\twsm\twsm2.app
#####################################################################
#---------- Jinnee ----------
#setenv AVSERVER "JINNEE "
#setenv FONTSELECT "JINNEE "
#shell = c:\jinnee\jinnee.app
#--------- Teradesk ---------
#setenv AVSERVER "DESKTOP "
#setenv FONTSELECT "DESKTOP "
#shell = c:\utils\teradesk\desktop.prg
setenv THINGDIR c:\thing126\thing
setenv AVSERVER "THING"
setenv FONTSELECT "THING"
shell=c:\thing126\thing\thing.app
Attachment:
reboot.jpg
Description: JPEG image
begin:vcard fn;quoted-printable:Pawe=C5=82 G=C3=B3ralski n;quoted-printable;quoted-printable:G=C3=B3ralski;Pawe=C5=82 email;internet:pawel.goralski@nokturnal.pl version:2.1 end:vcard
